Setting Up LAMP + memcached on Ubuntu Server 9.10

This post will show a guide on how to setup LAMP with memcached on three machines. Perhaps this will help us on writing technical report..huahuha

We are currently running our performance test on our web and database server using memcached. The test is used to monitor the cpu and memory usage using cacti. Thanks to khairina for SNMP and cacti configuration :)

We have installed LAMP server in two 64-bit machines, whereas 1 machine running apache2 with php5 while another one running MySQL 5.1.

We also have a dedicated memcached server. Since we are using php5, thus we chosen php as our memcached client.

Then it can be simply tested using 'ab' (apache bench).

Step 1: Setting up Web Server (192.168.0.101)

Installing apache2 and php5

$ sudo apt-get install apache2 php5 libapache2-mod-php5

Note: In ubuntu, php5 will use php5-prefork by default

Installing MySQL module for php5

$ sudo apt-get install libapache2-mod-auth-mysql php5-mysql

Then, edit php configuration file to add mysql extension

$ sudo vi /etc/php5/apache2/php.ini

Then add this line

extension=msql.so

Installing memcache module for php5

$ apt-get install php5-memcache

Then, edit php configuration file to add memcached extension

$ sudo vi /etc/php5/apache2/php.ini

Then add this line

extension=memcache.so

To ease us in locating our php file on our web server, we have changed the default location.

Edit /etc/apache2/sites-available/default. Don't forget to backup it first. (use gedit,vi or nano)

$ sudo vi /etc/apache2/sites-available/default

Then, find this two lines.

DocumentRoot /var/www/

Edit it into preferred directory, so it become

DocumentRoot /home/username/web/

Make sure the directory exists

$ mkdir /home/username/web/

Restart apache2

$ sudo /etc/init.d/apache2 restart

Now, we can create our php code inside the web directory.

Step 2: Setting up Database Server (192.168.0.102)

Installing MySQL server 5.1

$ sudo apt-get install mysql-server

Then edit mysql configuration file to bind address so it can be connected from any machines

$ sudo vi /etc/mysql/my.cnf

Edit this line

bind-address = 127.0.0.1

to (MySQL server IP address)

bind-address = 192.168.0.102

then, restart mysql server

$ sudo /etc/init.d/mysql restart

Add a user to enable to mysql client connect from different host (as mysql server) see the manual here

Step 3: Installing Memcached (192.168.0.103)

Get the latest memcached source file (current version is 1.4.4) that can be download from this site. Then, follow this guide

Or simply install using apt-get. In ubuntu 9.10 the memcached version is 1.2.8

$ sudo apt-get install memcached

Create a file, put the php code below and save it as index.php into /home/username/web directory (or /var/www/ if haven't do any changes)

<?php phpinfo(); ?>

Open web browser the type http://webserver_ipaddress/index.php. Then, the memcached module for php5 can be found in this page as figure below

Now, we can test our web and database server :D

References:

https://help.ubuntu.com/community/ApacheMySQLPHP

http://ubuntuforums.org/showthread.php?t=440526

SNMP & Cacti Configuration (PART 2)

SNMP configuration updated. Previously, I have posted SNMP & Cacti Configuration. I want to add some additional necessary information to configure which I have done.

Firstly I checked my SNMP if it's working or not:

$snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

It suppose to return your ip as output like below:

In my case, SNMP is not working and return many different errors. What I have done to solve the problem is just edit snmpd configuration file (snmpd.conf). Below is my snmpd.conf (/etc/snmp/snmpd.conf), you could simply copy paste and try to your PC. (Copy the original file first so you have backup if something happen) -- I put the lines you have to check in red.

##########################################

# EXAMPLE.conf:

# An example configuration file for configuring the ucd-snmp snmpd agent.

#

##########################################

# This file is intended to only be an example. If, however, you want

# to use it, it should be placed in /etc/snmp/snmpd.conf.

# When the snmpd agent starts up, this is where it will look for it.

#

# You might be interested in generating your own snmpd.conf file using

# the "snmpconf" program (perl script) instead. It's a nice menu

# based interface to writing well commented configuration files. Try it!

#

# Note: This file is automatically generated from EXAMPLE.conf.def.

# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run

# configure & make, and then make sure you read the EXAMPLE.conf file

# instead, as it will tailor itself to your configuration.

# All lines beginning with a '#' are comments and are intended for you

# to read. All other lines are configuration commands for the agent.

# PLEASE: read the snmpd.conf(5) manual page as well!

##########################################

# Access Control

##########################################

# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY

# KNOWN AT YOUR SITE. YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO

# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.

# By far, the most common question I get about the agent is "why won't

# it work?", when really it should be "how do I configure the agent to

# allow me to access it?"

#

# By default, the agent responds to the "public" community for read

# only access, if run out of the box without any configuration file in

# place. The following examples show you other ways of configuring

# the agent so that you can change the community names, and give

# yourself write access as well.

#

# The following lines change the access permissions of the agent so

# that the COMMUNITY string provides read-only access to your entire

# NETWORK (EG: 10.10.10.0/24), and read/write access to only the

# localhost (127.0.0.1, not its real ipaddress).

# For more information, read the FAQ as well as the snmpd.conf(5)

# manual page.

##########################################

# First, map the community name (COMMUNITY) into a security name

# (local and mynetwork, depending on where the request is coming

# from):

# sec.name source community

com2sec local localhost public

com2sec mynetwork 10.101.95.0/24 public

##########################################

# Second, map the security names into group names:

# sec.model sec.name

group MyROSystem v1 paranoid

group MyROSystem v2c paranoid

group MyROSystem usm paranoid

group MyROGroup v1 local

group MyROGroup v2c local

group MyROGroup usm local

group MyRWGroup v1 mynetwork

group MyRWGroup v2c mynetwork

group MyRWGroup usm mynetwork

##########################################

# Third, create a view for us to let the groups have rights to:

# incl/excl subtree mask

view all included .1 80

view system included .iso.org.dod.internet.mgmt.mib-2.system

##########################################

# Finally, grant the 2 groups access to the 1 view with different

# write permissions:

# context sec.model sec.level match read write notif

access MyROSystem "" any noauth exact system none none

access MyROGroup "" any noauth exact all none none

access MyRWGroup "" any noauth exact all all none

#--------------------------------------------

#############################################

# System contact information

# It is also possible to set the sysContact and sysLocation system

# variables through the snmpd.conf file. **PLEASE NOTE** that setting

# the value of these objects here makes these objects READ-ONLY

# (regardless of any access control settings). Any attempt to set the

# value of an object whose value is given here will fail with an error

# status of notWritable.

#Editing this value is optional, i dont do any changes

syslocation Unknown (configure /etc/snmp/snmpd.local.conf)

syscontact Root (configure /etc/snmp/snmpd.local.conf)

End changes. Leave code below this line as it is

################################################

After edit this file, save it. Then restart SNMP. Make sure you restart.

$sudo service snmpd restart

Then, do check again.

$snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

That's all. :)

http://www.cyberciti.biz/nixcraft/linux/docs/uniqlinuxfeatures/mrtg/mrtg_config_step_3.php

http://www.debianhelp.co.uk/snmp.htm

Join Freenode

I had joined Freenode :)

I am cool :P

I am using X-Chat (also could use Pidgin, web or other IRC)

$sudo apt-get install xchat

You can use any channel available on freenode. (In the picture, I joined #ubuntu). After connecting to a channel, you could add channel, so dont worry :)

You could also build your own channel.

Done. Happy chatting :)